DVD가 없더라도 보통 컴퓨터를 쓰는데는 별 문제가 없습니다. 보통 CD/DVD로 배포되는 것들은 네트웍으로도 구할 수 있으니까요. 내가 데이터를 배포할 일이 있어도 네트웍이나 USB를 사용하면 됩니다. 하지만 새 OS를 DVD가 없는 시스템에 설치하려면 다른 추가 작업을 좀 해야 합니다. 일반적으로 OS 설치는 CD나 DVD를 통해 하는 것으로 가정되니까요. 보통은 USB의 CD영역, PXE 설치, USB에 부트로더 설치하기 등등을 사용합니다.
Windows 7 의 경우는 Microsoft 에서 Windows 7 USB/DVD Download Tool 라는 편리한 프로그램을 제공합니다. 이 프로그램을 다운로드하여 사용하면 Windows 7 설치 디스크 이미지를 USB로 복사해서 DVD가 없는 시스템에 USB 부팅으로 쉽게 Windows 7 을 사용할 수 있습니다. 이 프로그램의 기본적인 사용방법은 웹 검색하면 많이 나오니 이 글에서는 다루지 않습니다.
하지만 이 프로그램은 Microsoft 에서 다운받은 이미지나, 정식 DVD로부터 추출한 ISO만 인식합니다. DELL 업그레이드 DVD 처럼 수정된 이미지를 프로그램에서 불러들이면 다음과 같은 에러가 발생합니다. "The selected file is not a valid ISO file. Please Select a valid ISO file and try again"
이런 경우에는 isoavdpcopy 툴을 사용하면 AVDP 코드를 수정된 ISO에 삽입하여 정상적으로 인식되게 할 수 있습니다. isoavdpcopy 툴을 다운로드한 뒤 수정된 ISO가 있는 폴더에 압축을 풀고, ISO 파일을 isoavdpcopy 실행파일에 던져넣으면 정상적으로 인식되게 바뀝니다.
참고로, Windows XP 32bit 컴퓨터에서 Windows 7 x64 (64bit) USB를 만들려고 하면 bootsect 에러가 납니다. 이 문제를 해결하기 위해서는 32bit 인 bootsect.exe 를 "Windows 7 USB/DVD Download Tool"가 설치된 폴더에 미리 복사해둬야 합니다. bootsect.exe 파일은 1. Microsoft Store account 를 통해 다운로드받거나, 2. Windows Vista 32bit가 설치된 컴퓨터에서 복사하거나, 3. Windows 7 32bit 설치시디에서 복사할 수 있습니다.
이 외에도 Ultra ISO 프로그램을 사용하여 ISO로부터 부팅 가능한 USB를 만드는 방법과 ISO/DVD의 내용을 USB로 복사한 후 파티션을 부팅 가능하게 만들고 bootsect 프로그램으로 부트섹터를 심는 방법도 있습니다. 다만 grub2의 ISO 부팅 방식은 loopback device가 chainloader 를 지원하지 않기 때문에 사용할 수 없습니다. 각자 편한 방법으로 사용하시기 바랍니다.
When the DVD drive is leaved out, there is almost no problem while running it. But installing a new OS to a DVD-less system require some more things to do: CD area in USB, PXE boot, installing bootloader to USB, etc.
In the case of Windows 7, Microsoft provides a simple tool to transfer the DVD image of Windows 7 to an USB stick, Windows 7 USB/DVD Download Tool. Downloading and using this tool, it's easy to make a USB which can install Windows 7 to DVD-less system with just 4 steps. You can find lot's of information about this tool on the web, so the basic usage of it is not covered by this article.
But, this tool just reconize the DVD image (ISO) which is downloaded from Microsoft or made from original DVD installation disc. That means the custom ISO like the upgrade DVD from DELL cannot be used with following error: "The selected file is not a valid ISO file. Please Select a valid ISO file and try again."
The solution is isoavdpcopy tool, which add proper AVDP seeking code to make the custom ISO can be used by Windows 7 USB/DVD Download Tool. Download and unzip this tool to the folder which contains the custom ISO and drag the ISO to the tool. The previous error will be resolved well.
Btw, if you are making the Windows 7 x64 USB at a Windows XP 32bit system, 32bit bootsect.exe should be located at the "Windows 7 USB/DVD Download Tool" directory. This file can be, 1. Downloaded from Microsoft Store account, 2. System32 folder of Windows Vista 32bit, 3. Windows 7 32bit installation DVD.
There are some other way to make Windows 7 installation USB, using UltraISO, format/partitioning/make active/copy installation content. But grub2 do not support booting from Windows installation ISO file because grub2 cannot chainload into ISO loopback device.
Posted by Arcy


HangulPuTTY-0.60.h1a2.exe
apa.tlo



























































































